AVK GATE VALVE, FLANGED, OS&Y, PN10/16
EN 558 Table 2 basic series 3, rising stem 1.4401, handwheel, DN50-400
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
Flanged gate valve with rising stem 1.4401 for drinking water and neutral liquids to max. 70°C
AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The double safety stuffing box sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.
| Variant 21/34-004 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN50 - DN400 |
| PN: | PN16 |
| Closing direction: | Clockwise to Close |
Features
- Wedge core fully vulcanized with drinking water approved EPDM rubber in a sophisticated process that eliminates creeping corrosion underneath the rubber
- Wedge shoes in PA and guide rails on the body make the wedge slide easily up and down regardless of differential pressure
- Outside yoke and rising stem for clear indication of valve status at a distance
- Stuffing box for re-tightening with three main O-rings and two NBR O-rings in a polyamide gland bushing
- Thrust bearing consisting of an alu-bronze stem nut between stainless steel washers
- Handwheel and actuator flange
- Stem in high grade stainless steel AISI 316/1.4401 with rolled threads for high strength
- Bonnet gasket in EPDM with a circular cross-section, fixed in a recess to avoid blow-out
- Counterbored A2 bonnet bolts, sealed with hot-melt and encircled by the bonnet gasket
- Fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
Downloads
Datasheet
Appendix
Tender Text
Installation, Operation & Maintenance
Animation
| AVK_Gate valves_animation_2022.mp4 |
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
Flange drilling |
L mm |
HO mm |
HC mm |
A mm |
D mm |
Dh mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 21-050-34-4141264 | 50 | PN10/16 | 178 | 420 | 435 | 205 | 165 | 125 | 14 |
| 21-065-34-4141264 | 65 | PN10/16 | 190 | 442 | 460 | 205 | 185 | 145 | 16 |
| 21-080-34-4141264 | 80 | PN10/16 | 203 | 527 | 537 | 205 | 200 | 160 | 21 |
| 21-100-34-4141264 | 100 | PN10/16 | 229 | 560 | 564 | 205 | 220 | 180 | 24 |
| 21-125-34-4141264 | 125 | PN10/16 | 254 | 634 | 622 | 280 | 250 | 210 | 31 |
| 21-150-34-4141264 | 150 | PN10/16 | 267 | 743 | 729 | 280 | 285 | 240 | 41 |
| 21-200-34-4041264 | 200 | PN10 | 292 | 964 | 926 | 330 | 340 | 295 | 66 |
| 21-200-34-4141264 | 200 | PN16 | 292 | 965 | 926 | 330 | 340 | 295 | 66 |
| 21-250-34-4041264 | 250 | PN10 | 330 | 1152 | 1095 | 410 | 422 | 350 | 100 |
| 21-300-34-4041264 | 300 | PN10 | 356 | 1346 | 1263 | 410 | 452 | 400 | 135 |
| 21-300-34-4141264 | 300 | PN16 | 356 | 1346 | 1263 | 410 | 452 | 410 | 135 |
| 21-350-34-4041264 | 350 | PN10 | 381 | 1689 | 1553 | 600 | 564 | 460 | 203 |
| 21-350-34-4141264 | 350 | PN16 | 381 | 1689 | 1574 | 600 | 564 | 470 | 233 |
| 21-400-34-4041264 | 400 | PN10 | 406 | 1716 | 1560 | 600 | 565 | 515 | 214 |
| 21-400-34-4141264 | 400 | PN16 | 406 | 1716 | 1597 | 600 | 565 | 525 | 239 |
2D/3D drawings
Enquiry
Scroll for more info
Components
| 1. | Yoke | Ductile iron GJS-500-7 (GGG-50) |
| 2. | Stem | Stainless Steel 1.4401 (316) |
| 3. | Wedge nut | Brass, DZR CW626N |
| 4. | Bonnet | Ductile iron GJS-500-7 (GGG-50) |
| 5. | Bonnet gasket | EPDM rubber |
| 6. | Wedge shoe | PA 6.6 |
| 7. | Wedge core | Ductile iron GJS-500-7 (GGG-50) |
| 8. | Wedge rubber | EPDM rubber |
| 9. | Body | Ductile iron GJS-500-7 (GGG-50) |
| 10. | Bolt | Stainless steel A4 |
| 11. | Nut | Stainless steel A4 |
| 12. | Washer | Stainless steel A4 |
| 13. | Gland follower | Ductile iron GJS-500-7 (GGG-50) |
| 14. | Gland | PA 6.6 |
| 15. | Bushing | PA 6.6 |
| 16. | Stem seal | NBR rubber |
| 17. | Pin | Stainless steel A4 |
| 18. | Bolt | Stainless steel A4 |
| 19. | Washer | Stainless steel 1.4021 |
| 20. | Handwheel | Ductile iron GJS-500-7 (GGG-50) |
| 21. | Stem nut | Alu-bronze CC331G |
| 22. | Bracket | Ductile iron GJS-500-7 (GGG-50) |
| 23. | Thrust washer | Stainless steel 1.4021 |
| 24. | Handwheel hub | Ductile iron GJS-500-7 (GGG-50) |
| 25. | Thrust washer | Stainless steel 1.4021 |
Test/Approvals
- Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
Standards
- Designed according to EN 1074 part 1 & 2
- Face-to-face dimension according to EN 558 Table 2 Basic Series 3
- Standard flange drilling to EN1092-2 (ISO 7005-2), PN10/16