AVK BY-PASS GATE VALVE, PN16
For large AVK series 06 gate valves, DN80
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
By-pass gate valve for large AVK series 06 gate valves
AVK series 126 is a small gate valve specially designed to be installed in parallel with a larger gate valve. As gate valve size increases the water pressure force on the wedge can become so large that the operation of the valve becomes difficult to manage with ordinary means. To reduce these forces a by pass valve can be installed to release the pressure difference and ease the operation. AVK series 126 is designed to be installed on AVK series 06, DN700-1200.
| Variant 126/99-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN80 |
| PN: | PN16 |
| Closing direction: | Clockwise to Close |
Features
-
A fixed, integral wedge nut prevents vibration and ensures durability
- Fully vulcanized wedge with guide rails and polyamide wedge shoes ensure effortless opening and closing
- A large conical stem hole in the wedge creates circulation and prevents stagnant water
- Three independent stem seals: outermost an NBR wiper ring protects against pollution from the environment, next the polyamide radial bearing incorporates two NBR O-rings and innermost an EPDM lip seal is the main hydraulic seal to the flow
- Full circle thrust collar provides fixation of the stem and low free running torques
- Round EPDM bonnet gasket fixed in a recess to prevent blow-out
- Counterbored stainless steel bonnet bolts encircled by the bonnet gasket and sealed with hot melt glue
- Full bore
- Epoxy coating to DIN 3476-1 and EN 14901, GSK approved
Downloads
Datasheet
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | DN mm |
H3 mm |
L mm |
W mm |
W1 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|
| 126-1000-99-1039464 | 80 | 349 | 236 | 395 | 260 | 16 |
Enquiry
Scroll for more info
Components
| 1. | Wiper ring | NBR rubber |
| 2. | Stem seal | EPDM rubber |
| 3. | Bonnet bolt | Stainless steel A2 |
| 4. | Body | Ductile iron |
| 5. | Wedge nut | Brass, DZR CW626N |
| 6. | Wedge core | Ductile iron |
| 7. | Wedge rubber | EPDM rubber |
| 8. | O-ring | NBR rubber |
| 9. | Radial bearing | PA 6.6 |
| 10. | O-ring | NBR rubber |
| 11. | Thrust collar | Brass, DZR CW602N |
| 12. | Stop ring | Stainless steel 1.4104 |
| 13. | Stem | Stainless steel 1.4104 |
| 14. | Bonnet | Ductile iron |
| 15. | Bonnet gasket | EPDM rubber |
| 16. | Wedge shoe | PA 6.6 |
Test/Approvals
- Hydraulic test according to EN 1074-1 and 2 / EN 12266
- Belgaqua approved
Standards
- Designed according to EN 1074 part 1 & 2
