AVK BALL CHECK VALVE, THREADED, PN10
Ductile iron, DN32-50
Contact
AVK International A/S
Bizonvej 1, Skovby, 8464 Galten, Denmark
Ball check valve with BSP threads for wastewater treatment and neutral liquids to max. 70° C
AVK ball check valves are self-cleaning and with full bore. The ball rotates during operation eliminating the risk of impurities getting stuck on the ball. The full and smooth bore ensures full flow with low pressure loss and eliminates the risk of deposits at the bottom. AVK ball check valves are available with flanges and internal threads. They are delivered with NBR lined ball as standard and optionally with ball of polyurethane available in different weights.
| Variant 53/30-005 | |
|---|---|
| Connection: | Internal Thread |
| Material: | Ductile Iron |
| DN: | DN32 - DN50 |
| PN: | PN10 |
Features
- Self-cleaning construction, where the ball rotates during operation eliminating the risk of impurities getting stuck on the ball
- Full bore ensures low pressure loss and minimum back pressure
- Smooth bore eliminates the risk of deposits at the bottom
- Ball of steel vulcanized with NBR rubber. The rubber hardness is optimised to prevent the ball from getting stuck in the seat.
- The ball is optionally available in polyurethane suitable for abrasive media and if different ball weights are necessary to prevent vibration and water hammer
- Compact design and low weight
- Bolts and nuts of stainless steel and body and cover of ductile iron with epoxy coating internally and externally according to AVK coating standard
Downloads
Datasheet
Appendix
Certificate(s)
Installation, Operation & Maintenance
Animation
| AVK_ball_check_valve_animation.mp4 |
Reference nos. and dimensions:
Scroll for more info
Components
| 1. | Cover | Ductile iron GJS-500-7 |
| 2. | Washer | Stainless steel A2 |
| 3. | Bolt | Stainless steel A2 |
| 4. | Nut | Stainless steel A4 |
| 5. | Gasket | NBR rubber |
| 6. | Body | Ductile iron GJS-500-7 |
| 7. | Ball | Steel with NBR-liner |
Test/Approvals
- Hydraulic test according to EN12050-4.
- Hydraulic test according to EN12050-4
- Approved according to 60143502, TÜV-Mark
Standards
- Designed according to AS4794, Designed according to EN 12050-4
